Precision Spiral Bevel Planetary Gearboxes ServoFoxx FU-Tandler

Series PL2 FS
Extremely small play. Developed specifically for use with highly dynamic servomotors. With two, three or even four gear stages.

Ratio up to 10.000:1

Series PL2
Also available without flange or coupling. On the input side there is a keyed input shaft, otherwise identical to the PL2 FS series. The planetary input shaft can be easily integrated into existing drive systems.

Ratios up to i = n1:n2 = 3:1 to 10:1
Multi-stage gearboxes with ratios up to 10,000: 1 are possible.

Series FS2
Enables motors to be connected directly to the precision right angle gearbox. The outputshaft can be solid, hollow, switched or multiplied to give up to five outputs.

Ratios up to i = n1:n2 = 1:1 up to 6:1 (depending upon gearbox size)

Series FS2 HW, HWS, HWK, HWZ -variants with hollow shaft

Enables motors to be connected directly to the precision right angle gearbox.

The outputshaft can be solid, hollow, switched or multiplied to give up to five outputs.

Ratios up to i = n1:n2 = 1:1 hasta 6:1 (depending upon gearbox size).

Series PSK2 FS -with coupling-
Right angle drives offering the output options of spiral bevel gears with even higher ratios. Input side planetary stage in four sizes, suitable for any motor desired. Outside spiral bevel stage for powerful options such as hollow shaft, switching or up to five outputs. Gearbox sizes can be combined and optimised for maximum output torque capacity.

Series PSK2
ServoFoxx® gearboxes with an input shaft are also suitable for conventional mechanical drives, without servo technology.

Owing to the feasibility of high ratios the PSK2 gearbox is especially useful for an emergency manual drive, with the hand wheel simply mounted to the input shaft. Additionally, of course, the use of the gearbox in motordriven applications without any restrictions is possible.

Ratios up to i = n1: n2 = 3 : 1 hasta 60:1 (depending upon gearbox size).

Series PSK2 FS HW, HWS, HWK, HWZ
Right angle drives offering the output options of spiral bevel gears with even higher ratios. Input side planetary stage in four sizes, suitable for any motor desired. Outside spiral bevel stage for powerful options such as hollow shaft, switching or up to five outputs. Gearbox sizes can be combined and optimised for maximum output torque capacity.

Ratios up toi = n1: n2 = 3 : 1 hasta 60:1 (depending upon gearbox size)

Please enquire for alternative and higher double stage ratios.

Series SKP2 FS2
Spiral bevel planetary gearboxes standard version

Integrates the range of spiral bevel and planetary gearboxes to provide the maximum torque capacity of the planetary gearbox at outputshaft d2.

Ratios up to i = n1: n2 = 3:1 hasta 60:1 (depending upon gearbox size)

Please enquire for alternative and higher double stage ratios. Also available with input shaft.

Series SKP2
The spiral bevel planetary gearbox is also available as a version with an input shaft. This gearbox is suitable for non-servo applications where right angle drives with high ratios and high torques are required. Therefore, the SKP2 is an extension of our standard spiral bevel gearbox range (see also our spiral bevel gear catalogue).

Ratios up to i = n1: n2 = 3:1 a 60:1 (depending upon gearbox size)