Contactar

¿Tiene alguna consulta acerca de nuestros productos o desea contactar con nuestra Oficina Técnica para reparar o fabricar a medida algún producto? ¡Contáctenos!

Oficina Central +34 932 681 833 fuiberica@fuiberica.com Contacto

Catálogo Resumido

Descargar

Drum Motors Van der Graaf

mototambor Van der Graaf rodillo motorizado

Van der Graaf Drum Motors are an efficient and safe solution for conveyor belt traction. A box encapsulates the entire gear and bearing system, isolating it from the outside environment – water, dust, dirt, grease and oil.

Consultar Fichas Técnicas

VENTAJAS DEL DISEÑO

Compact, robust and reliable
Well-sized gears and bearings
Wide range of powers and speeds
Low Life Cycle Costs
Fully enclosed

CAJA ENCAPSULADA Y ESTANCA

Oil filled
Easy to clean
Virtually maintenance free
Easy to install

Sección de 120 grados de un mototambor

A compact, clean, light, silent and safe system.

Maximum simplification
Notable improvement in safety: Worry-free operation, avoiding exposed rotating elements.
Space saving: no bulky support structures or protection of rotating components.
Reduced installation time.
Reduction of installation costs.

Lower maintenance expense.
Higher performance.
Preserving the transported merchandise: By avoiding lubricated chains, the transported material is avoided from contaminating the transported material with oil – especially important in the food sector, ready-made textiles, electronic components, etc…
Significantly reduce noise.

Forget traditional systems: visible rotating belt that must be protected, gears that release oil that can stain the transported goods, parts that gather dust from the environment and that are doomed to cause problems in a short time. Vibrations that produce annoying noises and are transmitted to other parts and support structures, which ends up loosening the screws and causing breakdowns.

Información técnica

Producto		Ficha técnica
TM 80B20	∅(mm): 80	Descargar
TM 100B25	∅(mm): 100 P (kW): 0,05 - 0,37 V (m/s): 0,007-3,6	Descargar
TM 113B25	∅(mm): 113 P (kW): 0,04 - 0,55 V (m/s): 0,008-4,4	Descargar
TM 127.25	∅(mm): 127 P (kW): 0,1 - 1,1 V (m/s): 0,008-2,6	Descargar
TM 138.25	∅(mm): 138 P (kW): 0,1 - 1,1 V (m/s): 0,009-2,8	Descargar
TM 160.25	∅(mm): 160 P (kW): 0,1 - 0,75 V (m/s): 0,13-3,3	Descargar
TM 160.30	∅(mm):160 P (kW): 0,10 - 2,2 V (m/s): 0,06-4,0	Descargar
TM 215.30	∅(mm): 215 P (kW): 0,10 - 2,2 V (m/s): 0,08-5,3	Descargar
TM 215.40	∅(mm):215 P (kW): 0,37 - 5,5 V (m/s): 0,12-4,7	Descargar
TM 273.40	∅(mm): 273 P (kW): 0,37 - 5,5 V (m/s): 0,16-5,0	Descargar
TM 315.40	∅(mm): 315 P (kW): 0,37 - 5,5 V (m/s): 0,18-5,2	Descargar
TM 315.50	∅(mm): 315 P (kW): 1,1 - 11 V (m/s): 0,16-4,4	Descargar
TM 400.50	∅(mm): 400 P (kW): 1,1 - 11 V (m/s): 0,20-4,8	Descargar
TM 400.60	400 1,5 - 22 0,20-4,2	Descargar
TM 500.60	500 1,5 - 22 0,25-4,4	Descargar
TM 500A75	500 11-30 0,80-3,2	Descargar
TM 620A75	620 11-30 1-3,9	Descargar

Referencia en base a pieza

Drummotors Van der Graaf: ATEX, Flameproof, Explosion-proof: TM80B20, TM100B25, TM113B25, TM127.25, TM138.25, TM160.25, TM160.30, TM215.30, TM215.40, TM273.40, TM315.40, TM315.50, TM400.50, TM400.60, TM500.60, TM500A75, TM620A75, TM12725, TM13825, TM16025, TM16030, TM21530, TM21540, TM27340, TM31540, TM31550, TM40050, TM40060, drum motor TM50060, rodillo motorizado A75,

Solicitar más información sobre este producto

¿Necesita algo? Llámenos

+34 932 681 833