Tandler Planetary Gearboxes

Series PL2 FS
This extremely low-backlash planetary gearbox has been developed specifically for use with highly
dynamic servomotors. With two, three or even four gear stages.

Ratios up to 10,000:1 can be achieved

Series PL2
Also available without a motor flange and coupling. On the input side, there is an input shaft with key, otherwise the gearboxes are identical to the PL2 FS. The planetary gear input shaft can be easily integrated into existing powertrains.

Ratios up to i = n1:n2 = 3:1 to 10:1
Multi-stage, gearboxes with ratios up to 10.000:1

Series FS2
Enables motors to be connected directly to the precision right angle gearbox. The outputshaft can be
solid, hollow, switched or multiplied to give up to five outputs.

Ratios i= n1:n2 = 1:1 up to 6:1 (depending upon gearbox size)

Series FS2 HW, HWS, HWK, HWZ -Con eje de salida hueco-
Enables motors to be connected directly to the precision right angle gearbox.
The outputshaft can be solid, hollow, switched or multiplied to give up to five outputs
Ratios  i = n1:n2 =1:1 up to 6:1 (depending upon gearbox size)

Series PSK2 FS -with coupling
Right angle drives offering the output options of spiral bevel gears with even higher ratios. Input side planetary stage in four sizes, suitable for any motor desired. Outside spiral bevel stage for powerful options such as hollow shaft, switching or up to five outputs. Gearbox sizes can be combined and optimised for maximum output torque capacity.

Ratios  i = n1:n2 = 3:1 up to 60:1 (depending upon size)

Series PSK2
ServoFoxx® gearboxes with an input shaft are also suitable for conventional mechanical drives, without servo technology. Owing to the feasibility of high ratios the PSK2 gearbox is especially useful for an emergency manual drive, with the hand wheel simply mounted to the input shaft. Additionally, of course, the use of the gearbox in motordriven applications without any restrictions is possible.

Ratios  i = n1: n2 = 3 : 1 up to 60:1 (depending upon size)

Series PSK2 FS HW, HWS, HWK, HWZ
Right angle drives offering the output options of spiral bevel gearboxes with even higher ratios. Planetary input stage in four sizes, suitable for mounting virtually any motor. Spiral bevel output stage for powerful options such as hollow shaft, switching or up to five output shafts. Gearbox sizes can be combined and optimised for maximum output torque capacity

Ratios  i = n1: n2 = 3 : 1 up to 60:1 (depending upon size)

Please enquire for alternative and higher double stage ratios.

Series SKP2 FS2 :
Integrates the range of spiral bevel and planetary gearboxes to provide the maximum torque capacity of the planetary gearbox at outputshaft d2.
Ratios  i = n1: n2 = 3:1 up to 60:1 (depending upon size)

Please enquire for alternative ratios. Also available with input shaft.

Series SKP2
The spiral bevel planetary gearbox is also available as a version with an input shaft. This gearbox is suitable for non-servo applications where right angle drives with high ratios and high torques are required. Therefore, the SKP2 is an extension of our standard spiral bevel gearbox range (see also our spiral bevel gear catalogue).
Ratios  i = n1: n2 = 3:1 up to 60:1 (depending upon size)