Planetary Gearboxes

Contactar

¿Tiene alguna consulta acerca de nuestros productos o desea contactar con nuestra Oficina Técnica para reparar o fabricar a medida algún producto? ¡Contáctenos!

Oficina Central +34 932 681 833 fuiberica@fuiberica.com Contacto

Planetary Gears

Tandler has developed a range of high precision planetary gearboxes with features ideal for the joint use of high speed and dynamic servo motors.

Zero backlash between the motor and gearbox, along with highly accurate gearing, ensures that the characteristic of minimal backlash or gear play (which has been a feature of the gearbox’s spiral bevel range from Tandler) is now available on the planetary gearbox market.

The coaxial planetary gearbox can be combined with a spiral bevel gearbox to provide high right angle drives with ratio accuracy up to 54:1.

PL FS Rim and coupler for the servo motors at the input. Shaft tuned at output.
PL HW Rim and hollow shaft at the input. Shaft tuned at output.
PL Fine-tuned axes at input and output.
SKP Combination of spiral bevel and planetary gearboxes, transformation ratios from 2:1 to 54:1.

Reductores de planetario de la serie PL2-FS

Series PL2 FS
Extremely low-backlash planetary gearbox developed specifically for use with highly
dynamic servomotors. With two, three or even four gear stages.

Ratios up to 10,000:1

Reductores de planetario de la serie PL2

Series PL2
also available without a motor
flange and coupling. On the input side, there is an input shaft with
key, otherwise the gearboxes are identical to the PL2 FS. The planetary gear input shaft can be easily integrated into existing powertrains.

Ratios up to i = n1:n2 = 3:1 to 10:1
Multi-stage, gearboxes with ratios up to 10,000: 1 are possible

Reductores de planetario de la serie FS2

Series FS2

Enables motors to be connected directly to the precision right angle gearbox. The outputshaft can be
solid, hollow, switched or multiplied to give up to five outputs.

Ratios up to i = n1:n2 = 1:1 up to 6:1 (depending upon gearbox size)

Series FS2 HW, HWS, HWK, HWZ with hollow shaft
Enables motors to be connected directly to the precision right angle gearbox.
The outputshaft can be solid, hollow, switched or multiplied to give up to five outputs.
Ratios up to i = n1:n2 = 1:1 up to6:1 (depending upon gearbox size)

Reductores de planetario de la serie PSK2-FS

Series PSK2 FS with coupling
Right angle drives offering the output options of spiral bevel gears with even higher ratios. Input side planetary stage in four sizes, suitable for any motor desired. Outside spiral bevel stage for powerful options such as hollow shaft, switching or up to five outputs. Gearbox sizes can be combined and optimised for maximum output torque capacity.
Ratios i = n1:n2 = 3:1 up to 60:1 (depending upon gearbox size)

Reductores de planetario de la serie PSK2

Series PSK2
ServoFoxx® gearboxes with an input shaft are also suitable for conventional mechanical drives, without servo technology. Owing to the feasibility of high ratios the PSK2 gearbox is especially useful for an emergency manual drive, with the hand wheel simply mounted to the input shaft. Additionally, of course, the use of the gearbox in motordriven applications without any restrictions is possible.
Ratios i = n1: n2 = 3 : 1 up to 60:1 (depending upon gearbox size)

Series PSK2 FS HW, HWS, HWK, HWZ
Planetary gearboxes with helical bevel gears with different hollow shafts. Right angle drives offering the output options of spiral bevel gears with even higher ratios. Input side planetary stage in four sizes, suitable for any motor desired. Outside spiral bevel stage for powerful options such as hollow shaft, switching or up to five outputs. Gearbox sizes can be combined and optimised for maximum output torque capacity.
Ratios up to i = n1: n2 = 3 : 1 hasta 60:1 (depending upon gearbox size)
Please enquire for alternative ratios and higher double stage ratios.

Reductores de planetario de la serie SKP2-FS2

Series SKP2 FS2 :
Reductores planetarios cónico espiral versión estándar.
Integrates the range of spiral bevel and planetary gearboxes to provide the maximum torque capacity of the planetary gearbox at outputshaft d2.
Ratios up to i = n1: n2 = 3:1 up to60:1 (depending upon gearbox size)

Please enquire for alternative ratios. Also available with input shaft.

Series SKP2
The spiral bevel planetary gearbox is also available as a version with an input shaft. This gearbox is
suitable for non-servo applications where right angle drives with high ratios and high torques are required. Therefore, the SKP2 is an extension of our standard spiral bevel gearbox range.
Ratios i = n1: n2 = 3:1 a 60:1 (depending upon gearbox size)

Producto			Ficha técnica
Planetary Gearboxes			Descargar

Producto

Ficha técnica

Planetary Gearboxes

Descargar

Planetary Gearboxes

Planetary Gears

Información técnica

Referencia en base a pieza

Solicitar más información sobre este producto

¿Necesita algo? Llámenos

		Series PL2 FS Extremely low-backlash planetary gearbox developed specifically for use with highly dynamic servomotors. With two, three or even four gear stages. Ratios up to 10,000:1

		Series PL2 also available without a motor flange and coupling. On the input side, there is an input shaft with key, otherwise the gearboxes are identical to the PL2 FS. The planetary gear input shaft can be easily integrated into existing powertrains. Ratios up to i = n1:n2 = 3:1 to 10:1 Multi-stage, gearboxes with ratios up to 10,000: 1 are possible

		Series FS2 Enables motors to be connected directly to the precision right angle gearbox. The outputshaft can be solid, hollow, switched or multiplied to give up to five outputs. Ratios up to i = n1:n2 = 1:1 up to 6:1 (depending upon gearbox size)

		Series FS2 HW, HWS, HWK, HWZ with hollow shaft Enables motors to be connected directly to the precision right angle gearbox. The outputshaft can be solid, hollow, switched or multiplied to give up to five outputs. Ratios up to i = n1:n2 = 1:1 up to6:1 (depending upon gearbox size)

		Series PSK2 FS with coupling Right angle drives offering the output options of spiral bevel gears with even higher ratios. Input side planetary stage in four sizes, suitable for any motor desired. Outside spiral bevel stage for powerful options such as hollow shaft, switching or up to five outputs. Gearbox sizes can be combined and optimised for maximum output torque capacity. Ratios i = n1:n2 = 3:1 up to 60:1 (depending upon gearbox size)

		Series PSK2 ServoFoxx® gearboxes with an input shaft are also suitable for conventional mechanical drives, without servo technology. Owing to the feasibility of high ratios the PSK2 gearbox is especially useful for an emergency manual drive, with the hand wheel simply mounted to the input shaft. Additionally, of course, the use of the gearbox in motordriven applications without any restrictions is possible. Ratios i = n1: n2 = 3 : 1 up to 60:1 (depending upon gearbox size)

		Series PSK2 FS HW, HWS, HWK, HWZ Planetary gearboxes with helical bevel gears with different hollow shafts. Right angle drives offering the output options of spiral bevel gears with even higher ratios. Input side planetary stage in four sizes, suitable for any motor desired. Outside spiral bevel stage for powerful options such as hollow shaft, switching or up to five outputs. Gearbox sizes can be combined and optimised for maximum output torque capacity. Ratios up to i = n1: n2 = 3 : 1 hasta 60:1 (depending upon gearbox size) Please enquire for alternative ratios and higher double stage ratios.

		Series SKP2 FS2 : Reductores planetarios cónico espiral versión estándar. Integrates the range of spiral bevel and planetary gearboxes to provide the maximum torque capacity of the planetary gearbox at outputshaft d2. Ratios up to i = n1: n2 = 3:1 up to60:1 (depending upon gearbox size) Please enquire for alternative ratios. Also available with input shaft.

		Series SKP2 The spiral bevel planetary gearbox is also available as a version with an input shaft. This gearbox is suitable for non-servo applications where right angle drives with high ratios and high torques are required. Therefore, the SKP2 is an extension of our standard spiral bevel gearbox range. Ratios i = n1: n2 = 3:1 a 60:1 (depending upon gearbox size)