×
Contactar

¿Tiene alguna consulta acerca de nuestros productos o desea contactar con nuestra Oficina Técnica para reparar o fabricar a medida algún producto? ¡Contáctenos!

Oficina Central +34 932 681 833 fuiberica@fuiberica.com Contacto
Catálogo Resumido

Pneumatic Expanding Shafts

Ejes Expansibles en voladizo (un punto de anclaje) de accionamiento neumático.

DX type expanding shafts have the following characteristics:

  • Made of steel or aluminium.
  • Pneumatic expansion system, with strips or keys.
  • With strips or keys, and diameters from 25 mm (1”) to 300 mm (12”).
  • Black anodized at 50 Hrc, for lasting protection. Possibility of white color, soft anodized with less protection (enquire).
  • C40/45 tempered steel (55/60 Hrc) journals that can be made to order at no extra cost.
  • DX type expanding shafts are made of aluminium with an extruded profile or may optionally be made of steel or ERGAL, a special aluminium alloy which allows an approximate increase of 30% in the shaft’s capacity without increasing its weight.

The standard shafts are fitted with vulcanised rubber strips (rubber hardness: 80Sh±5), but on request other kinds of strips are available. The journals can also be made to order; and our catalogue includes an assortment of standard versions that have been specifically designed to be used with our safety chucks and make locking easy. (enquire).

The journals can also be made to order. Standard versions that have been specifically designed to be used with our safety chucks.

EPECIFICACIONES ESTÁNDAR*

Diámetros estándar de ejes en voladizo: para diámetros interiores de mandril de bobina de 70mm, 3”(76,2mm), 150mm y 6”(152,4mm).
Anodizado duro negro (50 Hrc) para mayor protección con el tiempo. El eje de diámetro 6” (152,4mm) está disponible en anodizado blando (menor protección).
Ranuras: 6 ranuras para ejes de 70 mm, 5 o 6 ranuras para ejes de 3″ (76,2 mm) y 9 ranuras para ejes de 150mm y de 6″.

*Muchos de estos parámetros pueden hacerse a medida (consultar).

STANDARD SPECIFICATIONS*

Standard Pneumatic Expanding Shafts Diameters: Inside core diameter of 70mm, 3”(76.2mm), 150mm and 6”(152.4mm).
Black hard anodized (50 Hrc) for added protection over time. The 6” (152.4mm) diameter shaft is available in soft anodized (less protection).
Slots: 6-slot profile for 69 mm shafts, 5 or 6-slot profile for 3″ mm shafts and 9-slots for 148 and 150 mm shafts.

*Many of these parameters can be made to measure (enquire).

Tabla de especificaciones indicando longitudes disponibles y resto de parámetros

Información técnica

Producto Ficha técnica
ejes-expansibles-en-voladizo Ejes Expansibles en Voladizo Descargar

Referencia en base a pieza

Pneumatic Expanding Shafts: Cantilever, core, diametre, 70 , 76.2 ,100, 120, 150, 3”, 4”, 5“, 6”, customised, custom made

Solicitar más información sobre este producto

    ¿Necesita algo? Llámenos

    +34 932 681 833